«

»

Jun
28

Customize your coilovers with Tanabe Pro210 springs!

Are your springs worn or did you just want to change the specs on your coilovers? Did you need a higher or lower spring rate or to change the height slightly? You can do so by changing your springs out with Tanabe Pro 210 springs! You do not need to have Tanabe coilovers to be able to use them. You’ll want to measure the inner diameter of your current spring and find something with the same measurement. Then you’ll want to take measurements of your old spring and figure out what spring rate and height you want. Don’t get anything to different from your current setup because your damper may need to be re-valved and the stroke length may not be appropriate for your setup.

For specs and pricing, please check the Pro 210 Springs page here

 

-D.

Leave a Reply